Remote control car making tutorial
Author:Rouding.com Date: 09/27/2018
First prepare a few cardboard.
Cut them properly and stick the 4 sheets together to form a thick board for the chassis.
Prepare the wheels, my wheels are removed from the toy car when I was a child, a little small, but I can fix them with iron wire.
Prepare a big gear for turning.
Make it like this, it seems that the change is not big, in fact, one of the holes is processed into strip holes.
Fix a part of the two used refills on both sides of the chassis with hot melt glue.
Fix the wheel like this.
Steering motor ~
Fix the motor, insert the big gear, and the steering system is complete!
The rear engine comes out~~ Use 502 super glue to fix a part of the used refill, add the wheel.
Fixed on the chassis to lead the line.
Solder the receiving board and battery.
Add a rubber band to the steering shaft of the steering, and use it to turn back to the forward direction.
I just found two useless LED at home, so I used them to make the lights, soldered the switches and led the wires.
Try to light it up, it’s quite bright.
Next to make the remote control. Make it by using the handle of the game console.
Take them apart.
Take the line of each button and solder the board.
Take the power cord out and bundle the battery underneath.
Remote control is complete!
Lights in the dark.
Source from: Rouding.com
Translated by: Utsource